Pump is auto-dispensing.
- Wipe the sensor window clean. Rubbing alcohol and a microfibre cloth are recommended.
- Switch the unit off for 5 seconds, then switch the unit back on.
Liquid Sensor Pump 414Ml
Liquid Sensor Pump 414Ml
2-Year Warranty
summary
Total:
£100
.
Liquid Sensor Pump 414Ml
specifications
soap type:
liquid
capacity:
414ml
power source:
built-in lithium ion battery
battery life:
8 months on 1 charge
soap compatibility:
simplehuman liquid soap + liquid soap without exfoliants + hand sanitiser
warranty:
2 year
sku:
ST1073
Frequently Asked Questions
Soap is dispensing erratically.
Lightly pull the rubber spout to wipe any dried residue.
How long does it take to fully charge?
3-4 hours or until a solid white light is displayed.
What do the indicator lights mean?
A solid white light indicates the unit is fully charged and displays when the unit is powered on. A pulsing white light indicates the unit is charging. A solid red light indicates the unit low on charge.
Lid pops up.
The air vent cutout might be clogged. Gently wipe any soap residue from around the white seal under the lid.
Unit is not dispensing even if charged. Unit is not turning on.
Pump needs to be reset:
- Switch the unit off for 5 seconds, then attempt to switch the unit back on.
- Wipe the sensor window clean. Rubbing alcohol and a microfiber cloth are recommended.
- From the the powered-on position, completely cover the sensor window with your hand and toggle the power switch off, on, off, on within 2 seconds to trigger a continuous dispense mode. Stop this mode by removing your hand from the sensor window.
